High lift truck Linde D12 HP AP
2000 kg
2424 mm
Manual
Are you interested in this product?
Product description
The D12 HP AP double-deck loaders are high-performance vehicles for the simultaneous transport of up to two load carriers. They show their strengths in the loading and unloading of multi-deck trucks, the rapid storage and retrieval of goods, and in order picking. Thanks to their folding stand-on platform, they can be used flexibly as a drive-on or ride-on model. With the platform folded up, they are particularly maneuverable and ideally suited for use in confined spaces. With the platform folded down, they are ideal for efficient transport over short and medium distances. The stand-on platform is decoupled from the chassis and fully suspended, increasing comfort and ergonomics for the operator. An innovative caster system ensures maximum stability at all times during all handling tasks. As high-performance models, the D12 HP AP boosts handling performance through high travel and lifting speeds. The Linde OptiLift assistance system ensures very precise load handling and additionally increases the working speed.
Features
During transport travel, the D12 HP AP's flip-up side bars protect the operator from injury. Additional safety is provided by the special design of the stand-on platform and controls, which keeps the operator's body within the vehicle contours at all times. When cornering, the Linde Curve Assist system automatically adjusts the speed to the steering angle to prevent risky maneuvers. As soon as the driver stops operating the butterfly lever (dead man's switch), the vehicle stops automatically. A soft landing function ensures that the forks of the vehicle touch down gently on the ground. This ensures that the load is not damaged in any way. Optional load protection grids are available at different heights to protect the driver from loads sliding back.
- Fold up side bars
- Speed adjustment in curves
- Sensitive dead man switch
- Soft landing function to protect the load
- Load protection grids in different heights
On the D12 HP AP, both the fold-out driver platform and the tiller are decoupled from the chassis and fully suspended. This protects the operator from shocks and vibrations in both drive and pedestrian modes. The electric power steering enables effortless vehicle maneuvers even in narrow, difficult-to-navigate areas. To this end, travel speed and steering resistance automatically and continuously adjust to the steering angle. The D12 HP AP also features the Linde OptiLift assistance system. With its help, the driver executes all lifting movements precisely and intuitively, allowing him to handle loads quickly and with maximum ergonomics. A multifunction display shows all relevant information on the vehicle status. The design of the battery cover provides sufficient space for work utensils such as wrapping paper, gloves and writing pads.
- Fully decoupled driver platform
- Electric power steering
- Linde OptiLift assistance system
- Vehicle speed adjustment
- Multifunction display
Thanks to the fold-up operator platform, the D12 HP AP can be used in either drive or pedestrian mode. With the platform folded in, they are particularly maneuverable and ideally suited for confined environments. As high-performance vehicles, they feature a powerful 3 kW three-phase AC motor that enables rapid acceleration and a top speed of up to 14 km/h (without load). Up to 7.5 km/h is possible with a double load. A powerful lift motor ensures faster lifting movements. More power when handling two pallets is provided by the optional Linde Speed Management assistance system. A 5-point support with optional electrically controlled and hydraulically assisted support wheels on both sides, as well as a centrally mounted drive wheel, ensures consistent traction and stability, especially when crossing ramps or uneven ground. The ergonomic double handle on the tiller includes all important vehicle functions. The D12 HP AP are available with a new generation of Li-ION batteries that can be complemented with an on-board charger for more efficient charging management. Three independent braking systems ensure driver and cargo safety. A start-up assistant prevents unintentional rolling backwards on sloping ground.
- Pedestrian and driving mode possible
- High travel and lifting speeds
- Linde Speed Management for double-deck loading
- 5-point support for more stability
- New generation of Li-ION batteries
The D12 HP AP are permanently available thanks to their maintenance-free 3kW three-phase motors. This enables long service intervals and permanently low maintenance costs. Robust cladding parts and a stable chassis ensure reliability even under tough operating conditions. The vehicle was developed according to the "design to service" principle. This means service technicians have fast access to all relevant components. Thanks to the innovative CAN bus structure, they can access all vehicle data via a diagnostic connector. The electric-electronic architecture makes it possible to remotely install software updates and new functions on the vehicle at any time, provided it is equipped with an optional data transmission unit.
- Maintenance free motor
- Robust construction
- CAN bus architecture
- Easily accessible components
- Modern E/E Architecture
Model overview*
Model | Load capacity / load | Hub | Driving speed with/without load | Turning radius | Battery voltage / nominal capacity K5 |
|---|---|---|---|---|---|
D12 HP AP | 1,2 / 1,0/1,0 / 2,0 (t) | 4266 (mm) | 11 / 14 km/h | 2194 / 2264 (mm) | 24 / 375 (V)/(Ah) o. kWh |
Special equipment
In double-deck operation, Linde Speed Management adjusts the vehicle speed depending on the load weight and lifting height, thus guaranteeing maximum performance and safety.
Various mast types and heights are available. The vehicle can thus be precisely adapted to the desired area of application.
In addition to the classic lead-acid batteries, the new generation of Li-ION batteries is also available.
They ensure constant contact with the ground for an optimal balance of stability and traction in all applications.
Load guards in various heights ensure that loads do not slide backwards and fall onto the driver when the load carrier is raised.
The cold storage design ensures full operational readiness and performance of the vehicle at minus 35° Celsius.
Features
During transport travel, the D12 HP AP's flip-up side bars protect the operator from injury. Additional safety is provided by the special design of the stand-on platform and controls, which keeps the operator's body within the vehicle contours at all times. When cornering, the Linde Curve Assist system automatically adjusts the speed to the steering angle to prevent risky maneuvers. As soon as the driver stops operating the butterfly lever (dead man's switch), the vehicle stops automatically. A soft landing function ensures that the forks of the vehicle touch down gently on the ground. This ensures that the load is not damaged in any way. Optional load protection grids are available at different heights to protect the driver from loads sliding back.
- Fold up side bars
- Speed adjustment in curves
- Sensitive dead man switch
- Soft landing function to protect the load
- Load protection grids in different heights
On the D12 HP AP, both the fold-out driver platform and the tiller are decoupled from the chassis and fully suspended. This protects the operator from shocks and vibrations in both drive and pedestrian modes. The electric power steering enables effortless vehicle maneuvers even in narrow, difficult-to-navigate areas. To this end, travel speed and steering resistance automatically and continuously adjust to the steering angle. The D12 HP AP also features the Linde OptiLift assistance system. With its help, the driver executes all lifting movements precisely and intuitively, allowing him to handle loads quickly and with maximum ergonomics. A multifunction display shows all relevant information on the vehicle status. The design of the battery cover provides sufficient space for work utensils such as wrapping paper, gloves and writing pads.
- Fully decoupled driver platform
- Electric power steering
- Linde OptiLift assistance system
- Vehicle speed adjustment
- Multifunction display
Thanks to the fold-up operator platform, the D12 HP AP can be used in either drive or pedestrian mode. With the platform folded in, they are particularly maneuverable and ideally suited for confined environments. As high-performance vehicles, they feature a powerful 3 kW three-phase AC motor that enables rapid acceleration and a top speed of up to 14 km/h (without load). Up to 7.5 km/h is possible with a double load. A powerful lift motor ensures faster lifting movements. More power when handling two pallets is provided by the optional Linde Speed Management assistance system. A 5-point support with optional electrically controlled and hydraulically assisted support wheels on both sides, as well as a centrally mounted drive wheel, ensures consistent traction and stability, especially when crossing ramps or uneven ground. The ergonomic double handle on the tiller includes all important vehicle functions. The D12 HP AP are available with a new generation of Li-ION batteries that can be complemented with an on-board charger for more efficient charging management. Three independent braking systems ensure driver and cargo safety. A start-up assistant prevents unintentional rolling backwards on sloping ground.
- Pedestrian and driving mode possible
- High travel and lifting speeds
- Linde Speed Management for double-deck loading
- 5-point support for more stability
- New generation of Li-ION batteries
The D12 HP AP are permanently available thanks to their maintenance-free 3kW three-phase motors. This enables long service intervals and permanently low maintenance costs. Robust cladding parts and a stable chassis ensure reliability even under tough operating conditions. The vehicle was developed according to the "design to service" principle. This means service technicians have fast access to all relevant components. Thanks to the innovative CAN bus structure, they can access all vehicle data via a diagnostic connector. The electric-electronic architecture makes it possible to remotely install software updates and new functions on the vehicle at any time, provided it is equipped with an optional data transmission unit.
- Maintenance free motor
- Robust construction
- CAN bus architecture
- Easily accessible components
- Modern E/E Architecture
Technical data
- Designation: High lift truck Linde D12 HP AP
| Drive type | Manual |
|---|---|
| Load capacity (kg) | 2000 |
| Lifting height (mm) | 2424 |
| Driving speed with/without load | 11 / 14 km/h |
