V-type forklift Linde H100 - H180 D
18000 kg
9500 mm
Diesel
Are you interested in this product?
Product description
The V-type forklifts H100 - H180 D move even very heavy loads precisely, quickly and economically. This results in outstanding handling performance compared with the competition. This is made possible by Linde's hydrostatic drive, which allows the heavy-duty truck to be moved with millimeter precision. The driver switches quickly and completely smoothly between forward and reverse travel. At the same time, modern diesel engines ensure high torque and low fuel consumption.
Features
Large glass surfaces and the curved windshield provide the driver with a very good view. This also applies to the view to the rear, because the visibility-optimized counterweight reduces the blind spot at the rear of the vehicle. In addition, the driver's cab is located exactly in the center and in the front position. The seat monitoring system locks the working and travel hydraulics when the operator is not seated in the vehicle. If the heavy-duty truck reverses, a clear signal tone (85dB) warns pedestrians and other vehicles.
- Excellent all-round visibility
- Seat monitoring
- Counterweight and mast visibility optimized
- Automatically engaging parking brake
An ergonomic workplace was a goal in the development of these heavy-duty trucks. That's why, for example, several rubber mounts decouple the operator's cab from the chassis and engine. This means that the driver experiences fewer shocks and vibrations. The height-adjustable armrest and steering column, as well as the adjustable seat with hydraulic suspension, guarantee an ergonomic workplace. The Linde dual pedal control system facilitates everyday work with short pedal travel and prevents fatigue.
- Rubber mounted driver's cab
- Seat with hydraulic suspension
- Operation of the vehicle with little effort
- Height adjustable armrest and steering column
The V-Stacker H100 - H180 D operate according to the "power on demand" principle: The engine speed is regulated according to the required power input. Therefore, the engine always runs in the most efficient range, thus saving fuel. The continuously variable Linde hydrostatic system ensures high handling performance, as the driver accelerates the vehicle without using the clutch or shifting gears. In addition, the truck comes to a standstill independently as soon as the driver does not depress the gas pedal pedals. With the help of Linde Load Control, he precisely controls every lift height and fork position.
- Diesel engines with high torque
- Low fuel consumption
- Hydrostatic direct drive
- Precise load movements through Linde Load Control
The hydrostatic direct drive from Linde is not only wear-free but also works without a gearbox, clutch, differential and drum brakes. This significantly reduces the service costs for the vehicle. Fast maintenance work is made possible by the service box on the side: the mechanic has direct access to various filters, batteries, wiper water tank and diagnostic plug. For work in the engine compartment, the driver's cab is tilted sideways via an electrohydraulic pump.
- Wear-free drive
- Side service box
- Easy access to the engine compartment
Model overview*
Model | Load capacity / load | Load center distance | Wheelbase | Turning radius | Driving speed with / without load |
|---|---|---|---|---|---|
H100/1200 | 10,0 (t) | 1200 (mm) | 3300 (mm) | 4578 (mm) | 29.7 / 30 km/h |
H100/600 | 10,0 (t) | 600 (mm) | 2960 (mm) | 4092 (mm) | 27.9 / 30 km/h |
H120/1200 | 12,0 (t) | 1200 (mm) | 3300 (mm) | 4578 (mm) | 29.7 / 30 km/h |
H120/600 | 12,0 (t) | 600 (mm) | 2960 (mm) | 4092 (mm) | 27.9 / 30 km/h |
H140/1200 | 14,0 (t) | 1200 (mm) | 3300 (mm) | 4578 (mm) | 29.7 / 30 km/h |
H140/600 | 14,0 (t) | 600 (mm) | 2960 (mm) | 4206 (mm) | 29.7 / 30 km/h |
H150/600 | 15,0 (t) | 600 (mm) | 2960 (mm) | 4206 (mm) | 29.7 / 30 km/h |
H160/1200 | 16,0 (t) | 1200 (mm) | 3600 (mm) | 4905 (mm) | 29.7 / 30 km/h |
H160/600 | 16,0 (t) | 600 (mm) | 3300 (mm) | 4578 (mm) | 29.7 / 30 km/h |
H180/600 | 18,0 (t) | 600 (mm) | 3300 (mm) | 4578 (mm) | 29.7 / 30 km/h |
Videos
Special equipment
Available are multiple pallet clamp, rotary device, paper clamp, carrying mandrel and more.
The range extends from mechanical or hydraulic fork carriers to models with additional end-position sideshift to tiltable and shaft-guided fork carriers.
This fork carriage can be equipped with up to six hydraulic circuits to allow a wide range of carrier and fork movements: lateral displacement of the entire fork carriage, even when both forks are in the outboard position; individual displacement of each fork; etc.
The entire cab can be rotated clockwise by 65 degrees and counterclockwise by 180 degrees. This means that the operator always has an optimum view of the load and travel path in every operating situation and without straining his posture. The cab is rotated either continuously via joystick or to preset positions via four buttons.
The operator's cab can be raised steplessly by up to 2.5 meters. This gives the operator a better view of the load and the working environment, enabling him to move the material to be transported more safely. The travel speed is automatically reduced as the lifting height increases.
The current load weight detected by sensors is displayed on the vehicle's standard 7″ color display.
When reversing, sensors detect the area behind the vehicle. The driver is warned of moving and immovable obstacles by a visual and acoustic signal. The range of the warning system is adjustable.
For the vehicles of this series, there is a diesel engine-powered and an engine-independent electric parking heater.
Features
Large glass surfaces and the curved windshield provide the driver with a very good view. This also applies to the view to the rear, because the visibility-optimized counterweight reduces the blind spot at the rear of the vehicle. In addition, the driver's cab is located exactly in the center and in the front position. The seat monitoring system locks the working and travel hydraulics when the operator is not seated in the vehicle. If the heavy-duty truck reverses, a clear signal tone (85dB) warns pedestrians and other vehicles.
- Excellent all-round visibility
- Seat monitoring
- Counterweight and mast visibility optimized
- Automatically engaging parking brake
An ergonomic workplace was a goal in the development of these heavy-duty trucks. That's why, for example, several rubber mounts decouple the operator's cab from the chassis and engine. This means that the driver experiences fewer shocks and vibrations. The height-adjustable armrest and steering column, as well as the adjustable seat with hydraulic suspension, guarantee an ergonomic workplace. The Linde dual pedal control system facilitates everyday work with short pedal travel and prevents fatigue.
- Rubber mounted driver's cab
- Seat with hydraulic suspension
- Operation of the vehicle with little effort
- Height adjustable armrest and steering column
The V-Stacker H100 - H180 D operate according to the "power on demand" principle: The engine speed is regulated according to the required power input. Therefore, the engine always runs in the most efficient range, thus saving fuel. The continuously variable Linde hydrostatic system ensures high handling performance, as the driver accelerates the vehicle without using the clutch or shifting gears. In addition, the truck comes to a standstill independently as soon as the driver does not depress the gas pedal pedals. With the help of Linde Load Control, he precisely controls every lift height and fork position.
- Diesel engines with high torque
- Low fuel consumption
- Hydrostatic direct drive
- Precise load movements through Linde Load Control
The hydrostatic direct drive from Linde is not only wear-free but also works without a gearbox, clutch, differential and drum brakes. This significantly reduces the service costs for the vehicle. Fast maintenance work is made possible by the service box on the side: the mechanic has direct access to various filters, batteries, wiper water tank and diagnostic plug. For work in the engine compartment, the driver's cab is tilted sideways via an electrohydraulic pump.
- Wear-free drive
- Side service box
- Easy access to the engine compartment
Technical data
- Description: V-type forklift Linde H100 - H180 D
| Drive type | Diesel |
|---|---|
| Load capacity (kg) | 18000 |
| Lifting height (mm) | 9500 |
| Driving speed with/without load | 29.7 / 30 km/h |
