The V08 low-lift order pickers are equipped with a vertically extendable lifting platform that raises the operator up to 1.2 meters above the floor. This allows him to comfortably reach the second shelf level during order picking. The V08 vehicles are available in two versions: In the V08-01 model, the forks are permanently connected to the operator's platform and connect to the operator's platform at ground level. In the long chassis version, the forks support a total weight of 1000 kilograms. In the short version, the forks carry a load carrier of up to 700 kilograms, making the vehicle more maneuverable overall. The V08-02 model is equipped with an additional lifting function that allows the operator to raise and lower the forks separately. This allows him to adjust the load carrier to a comfortable height for loading and unloading.
Features
On the V08, the outer edge of the driver's platform is slightly slanted upwards. This helps the driver to avoid missteps and provides additional safety, especially when the platform is raised. The driver's platform of the V08-02 can be fitted with side rails, which also protect against falls and increase the driver's sense of safety. In the event of a collision, the robust chassis of the vehicles are equipped with metal bumpers and optional rubber reinforcement to protect the driver and goods in the event of minor collisions. The vehicles can be optionally equipped with LED headlights and the Linde BlueSpot™, which casts a blue light spot on the ground as a warning signal for pedestrians or other drivers in the direction of travel. The entire floor area of the driver's platform acts as a dead man's switch. If the driver leaves the platform or presses the emergency stop button, the vehicle brakes automatically. In driving mode, the braking power is adapted to the current load weight and the speed is automatically reduced in bends to prevent tipping accidents.
- Raised outer edge for more surefootedness
- Metal or rubber impact protection
- LED front headlights and BlueSpot™ optional
- Platform bottom as dead man's switch
The V08 low lift order pickers are equipped with the intuitive Linde steering wheel. It is height-adjustable to provide the driver with a back-friendly working position. The spacious driver's platform with an access height of just 14.5 centimetres makes it easier to get in and out of the truck frequently. A non-slip rubber pad on the floor of the driver's platform improves stability and prevents slipping accidents. The V08 has large storage compartments for work materials. Additional brackets can be fitted to attach scanners, clipboards, film rolls and other utensils. The multifunctional color display provides all important vehicle information at a glance.
- Height-adjustable Linde steering wheel
- Spacious entrance and low step height
- Non-slip rubber pad
- Generous storage compartments
The lifting platform of the V08 reaches a height of 1.2 meters so that the driver can also easily reach the second shelf level. The lift mast control system Linde OptiLift simplifies handling thanks to smooth, vibration-free lifting movements. Depending on the vehicle version, the V08 can reach a top speed of up to 10 km/h even when loaded thanks to the powerful 2.3 kW motor. The precise and self-centering power steering keeps the vehicle on track at all times. The butterfly controls for the horn, lights, lift and all driving functions are integrated into the Linde steering wheel and can be used intuitively with just one hand. The V08-02 also has a pedestrian function: push buttons on the outside of the vehicle allow the order picker to be moved while the operator walks alongside it. This makes it easy to maneuver the vehicle forwards and backwards without having to get back in for short distances. With the additional lift of the V08-02, the driver positions the pallet at the most comfortable working level.
- Lifting platform up to 1.2 meters high
- Linde OptiLift for smooth lifting movements
- Powerful 2.3 kW motor
- Driving functions integrated in the Linde handlebars
- Pedestrian function for routes on foot
A robust housing and several bumpers protect the chassis of the V08 in the event of collisions. The stable, low-maintenance design of the order pickers ensures long maintenance intervals and thus ensures the high availability of the vehicles. Non-contact sensors do not wear out due to wear and tear and therefore rarely need to be replaced. For maintenance work, the CAN bus connection of the V08 ensures simple service processes: The service technician reads out the vehicle's system data and analyzes it for fast and precise troubleshooting via laptop. To enable service work to be carried out immediately, all the vehicle's important components are easily accessible. Cables and wiring harnesses are clearly arranged, which shortens the duration of maintenance work.
- Robust housing with bumper
- Long maintenance intervals
- CAN bus connection
- Easily accessible components
Videos & Pictures
Model overview
Model | Load capacity / load | Lifting height | Driving speed with/without load | Turning radius | Battery voltage / nominal capacity K5 |
|---|---|---|---|---|---|
V 08-01 (1000kg) | 1,0 (t) | 1050 (mm) | 10 / 10 km/h | 1742 (mm) | 24 / 345/375 (V)/(Ah) o. kWh |
V 08-01 (700kg) | 0,7 (t) | 1050 (mm) | 9 / 10 km/h | 1345 (mm) | 24 / 345/375 (V)/(Ah) o. kWh |
V 08-02 | 0,8 (t) | 1050 (mm) | 9 / 10 km/h | 1569 (mm) | 24 / 400/500 (V)/(Ah) o. kWh |
Special equipment
The bumper reduces vibrations in the event of a collision, protecting the driver, the vehicle and infrastructure such as shelving.
Pushbuttons are located on both sides of the vehicle. The driver uses them to operate the order picker from the outside while walking alongside. Using the walk-along mode, he conveniently moves the vehicle back and forth without having to get back on again for short distances.
The padded knee protection ensures that the operator can maintain a comfortable, fatigue-free position on the operator platform for extended periods of time.
The Linde BlueSpot™ route warning device increases safety during operation, as the LED spotlight makes forklifts visible without making a sound.
With numerous holders for work materials such as clipboards, scanners and film rolls, the operator's station can be adapted to the specific requirements of the operator.
With the innovative lithium-ion batteries from Linde , vehicles can be recharged in a much shorter time and temporarily charged during use.
The height of the Linde handlebar can be adjusted to the height and position of the driver - for even more ergonomic working.
The driver's platform of the V08-02 can be equipped with side rails that provide the driver with additional protection against falls.
